PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• ABS / ESP inoperative appears in dash cluster
• Power steering malfunction appears in dash cluster
• Fault code in various modules related to Loss of communication with ABS module
• Fault code 5001 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5944 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5945 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)

OEM Reference Numbers:

• A2215455232
• A2214313312
• 10092615823
• 10021201264
• 1060

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• ABS / ESP inoperative appears in dash cluster
• Power steering malfunction appears in dash cluster
• Fault code in various modules related to Loss of communication with ABS module
• Fault code 5001 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5944 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5945 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)

OEM Reference Numbers:

• A2215455232
• A2214313312
• 10092615823
• 10021201264
• 1060

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

This is a test and repair service of the customers own unit.

Common Faults:

• Stop light failure / stuck on
• Stop lights staying on
• Wipers not self parking
• Alarm sounding after vehicle locked
• Fault code B1000 - Internal malfunction
• Fault code U0140 - Lost communication with BCM
• Fault code U0121 - Lost communication with ABS

OEM Reference Numbers:

• 20935350
• 20864768

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

This is a test and repair service of the customers own unit.

Common Faults:

• Stop light failure / stuck on
• Stop lights staying on
• Wipers not self parking
• Alarm sounding after vehicle locked
• Fault code B1000 - Internal malfunction
• Fault code U0140 - Lost communication with BCM
• Fault code U0121 - Lost communication with ABS

OEM Reference Numbers:

• 20935350
• 20864768

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

This is a test and repair service of the customers own unit.

Common Faults:

• Stop light failure / stuck on
• Stop lights staying on
• Wipers not self parking
• Alarm sounding after vehicle locked
• Fault code B1000 - Internal malfunction
• Fault code U0140 - Lost communication with BCM
• Fault code U0121 - Lost communication with ABS

OEM Reference Numbers:

• 20935350
• 20864768

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

This is a test and repair service of the customers own unit.

Common Faults:

• Stop light failure / stuck on
• Stop lights staying on
• Wipers not self parking
• Alarm sounding after vehicle locked
• Fault code B1000 - Internal malfunction
• Fault code U0140 - Lost communication with BCM
• Fault code U0121 - Lost communication with ABS

OEM Reference Numbers:

• 20935350
• 20864768

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

This is a test and repair service of the customers own unit.

Common Faults:

• Stop light failure / stuck on
• Stop lights staying on
• Wipers not self parking
• Alarm sounding after vehicle locked
• Fault code B1000 - Internal malfunction
• Fault code U0140 - Lost communication with BCM
• Fault code U0121 - Lost communication with ABS

OEM Reference Numbers:

• 20935350
• 20864768

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• ABS / ESP inoperative appears in dash cluster
• Power steering malfunction appears in dash cluster
• Fault code in various modules related to Loss of communication with ABS module
• Fault code 5001 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5944 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5945 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)

OEM Reference Numbers:

• A2215455232
• A2214313312
• 10092615823
• 10021201264
• 1060

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

This is a test and repair service of the customers own unit.

Common Faults:

• Stop light failure / stuck on
• Stop lights staying on
• Wipers not self parking
• Alarm sounding after vehicle locked
• Fault code B1000 - Internal malfunction
• Fault code U0140 - Lost communication with BCM
• Fault code U0121 - Lost communication with ABS

OEM Reference Numbers:

• 20935350
• 20864768

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• ABS / ESP inoperative appears in dash cluster
• Power steering malfunction appears in dash cluster
• Fault code in various modules related to Loss of communication with ABS module
• Fault code 5001 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5944 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5945 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)

OEM Reference Numbers:

• A2215455232
• A2214313312
• 10092615823
• 10021201264
• 1060

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• ABS / ESP inoperative appears in dash cluster
• Power steering malfunction appears in dash cluster
• Fault code in various modules related to Loss of communication with ABS module
• Fault code 5001 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5944 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5945 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)

OEM Reference Numbers:

• A2215455232
• A2214313312
• 10092615823
• 10021201264
• 1060

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• A power window relearn will be required upon refitting 
• Exchange units are also available see 13574841CO - these units will require programming with GMH MDI / TIS

Common Faults:

• Ignition key locked in barrel, can not be removed
• Brake lights are not operating 
• Indicators not operating
• Transmission shifter locked in park, wont release
• AUX power / cigarette lighter has no power
• Boot release wont work
• Courtesy lights wont operate
• Park lamps inoperative
• Fault code B2585 - Left Park lamp control circuit malfunction
• Fault code B3867 - Right Park lamp control circuit malfunction
• Fault code B3883 - license plate lamp circuit malfunction
• Fault code U0140 - lost communication with BCM

OEM Reference Numbers:

• 13500385
• 13504449
• 13574841
• 13578421

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• ABS / ESP inoperative appears in dash cluster
• Power steering malfunction appears in dash cluster
• Fault code in various modules related to Loss of communication with ABS module
• Fault code 5001 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5944 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5945 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)

OEM Reference Numbers:

• A2215455232
• A2214313312
• 10092615823
• 10021201264
• 1060

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

This is a test and repair service of the customers own unit

Common Faults:

Not switching vacuum solenoid

OEM Reference Numbers:

8953335090

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, Key, key reader and immobilser for testing / repairs
• PEC can also remove the immobiliser function if required

Common Faults:

• No start
• Immobiliser fault

OEM Reference Numbers:

• 5WP4243
• 023906025

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• Please ensure ALL fault codes are recorded and sent in with repair
• Conductor Plate must be seperated/removed from Valve Body, excess Transmission fluid cleaned and packed safely to avoid any physical damage during transit
• We can also offer replacement 722.9 conductor plates if the customers original unit is physically damaged or unrepairable. (Key, EIS and ESL also required in this case to program a replacement unit)

Common Faults:

• Transmission flaring or slipping between gear changes
• Transmission holding in gear
• Loss of all drive
• The following diagnostic fault codes may be logged:
• 0641 Fully integrated transmission control control unit Y3/8n4 is defective
• 0642 The voltage supply of the speed sensors is faulty.
• 0705 Component Y3/8s1 (Selection range sensor VGS) is defective
• 0706 Check component Y3/8s1 (Selection range sensor VGS)
• 0717 The signal from component Y3/8n1 (Turbine speed sensor VGS) is not available
• 0718 Component Y3/8n1 (Turbine speed sensor VGS) is defective
• 0722 The signal from component Y3/8n3 (Output speed sensor VGS) is not available
• 0723 Component Y3/8n3 (Output speed sensor VGS) is defective
• 0748 The internal electrical check of component Y3/8y2 (K1 clutch control solenoid valve VGS) has failed
• 0778 The internal electrical check of component Y3/8y5 (B1 brake control solenoid valve VGS) has failed
• 0798 The internal electrical check of component Y3/8y7 (B3 brake control solenoid valve VGS) has failed
• 2216 Check component Y3/8s1 (Selection range sensor VGS) The adaptation sequence occurred outside the valid range
• 2716 The internal electrical check of component Y3/8y4 (K3 clutch control solenoid valve VGS) has failed
• 2725 The internal electrical check of component Y3/8y6 (B2 brake control solenoid valve VGS) has failed
• 2734 The internal electrical check of component Y3/8y3 (K2 clutch control solenoid valve VGS) has failed
• 2759 The internal electrical check of component Y3/8y8 (Torque converter lockup clutch control solenoid valve VGS) has failed
• 2766 Excessive rpms have occurred at component Y3/8n2 (Internal speed sensor VGS)
• 2767 The signal from component Y3/8n2 (Internal speed sensor VGS) is not available
• 2768 Component Y3/8n2 (Internal speed sensor VGS) is defective
• 2810 The internal electrical check of component Y3/8y1 (Working pressure control solenoid valve VGS) has failed
• Y3/8N1 turbine speed sensor
• Y3/8N2 internal speed sensor
• Y3/8N3 output speed sensor
• Y3/8S1 selection range sensor
• Y3/8Y1 working pressure control solenoid
• Y3/8Y2 K1 clutch solenoid 
• Y3/8Y3 K2 clutch solenoid
• Y3/8Y4 K3 clutch solenoid
• Y3/8Y5 B1 brake clutch solenoid
• Y3/8Y6 B2 brake clutch solenoid
• Y3/8Y7 B3 brake clutch solenoid
• Y3/8Y8 torque converter lockup solenoid

OEM Reference Numbers:

• A0034460310
• A0335457332
• A0335456732
• A0335456632
• 5WP21302K08
• 5WP21101
• 5WP21302K09
• A0002701700
• 000270170080
• A2202702906
• A2202703106
• A2202703206
• A2202701206
• A2202702106
• A2202701806
• A9062700006
• A2202701306
• A2202701506
• A2202702806
• A2202701906
• A2202702206
• A2202702406
• A2202700026
• A2702702306
• A2202700160
• A2122700006
• A2122700106
• A2202701406
• 7G TRONIC 722.9

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• Please ensure ALL fault codes are recorded and sent in with repair
• Conductor Plate must be seperated/removed from Valve Body, excess Transmission fluid cleaned and packed safely to avoid any physical damage during transit
• We can also offer replacement 722.9 conductor plates if the customers original unit is physically damaged or unrepairable. (Key, EIS and ESL also required in this case to program a replacement unit)

Common Faults:

• Transmission flaring or slipping between gear changes
• Transmission holding in gear
• Loss of all drive
• The following diagnostic fault codes may be logged:
• 0641 Fully integrated transmission control control unit Y3/8n4 is defective
• 0642 The voltage supply of the speed sensors is faulty.
• 0705 Component Y3/8s1 (Selection range sensor VGS) is defective
• 0706 Check component Y3/8s1 (Selection range sensor VGS)
• 0717 The signal from component Y3/8n1 (Turbine speed sensor VGS) is not available
• 0718 Component Y3/8n1 (Turbine speed sensor VGS) is defective
• 0722 The signal from component Y3/8n3 (Output speed sensor VGS) is not available
• 0723 Component Y3/8n3 (Output speed sensor VGS) is defective
• 0748 The internal electrical check of component Y3/8y2 (K1 clutch control solenoid valve VGS) has failed
• 0778 The internal electrical check of component Y3/8y5 (B1 brake control solenoid valve VGS) has failed
• 0798 The internal electrical check of component Y3/8y7 (B3 brake control solenoid valve VGS) has failed
• 2216 Check component Y3/8s1 (Selection range sensor VGS) The adaptation sequence occurred outside the valid range
• 2716 The internal electrical check of component Y3/8y4 (K3 clutch control solenoid valve VGS) has failed
• 2725 The internal electrical check of component Y3/8y6 (B2 brake control solenoid valve VGS) has failed
• 2734 The internal electrical check of component Y3/8y3 (K2 clutch control solenoid valve VGS) has failed
• 2759 The internal electrical check of component Y3/8y8 (Torque converter lockup clutch control solenoid valve VGS) has failed
• 2766 Excessive rpms have occurred at component Y3/8n2 (Internal speed sensor VGS)
• 2767 The signal from component Y3/8n2 (Internal speed sensor VGS) is not available
• 2768 Component Y3/8n2 (Internal speed sensor VGS) is defective
• 2810 The internal electrical check of component Y3/8y1 (Working pressure control solenoid valve VGS) has failed
• Y3/8N1 turbine speed sensor
• Y3/8N2 internal speed sensor
• Y3/8N3 output speed sensor
• Y3/8S1 selection range sensor
• Y3/8Y1 working pressure control solenoid
• Y3/8Y2 K1 clutch solenoid 
• Y3/8Y3 K2 clutch solenoid
• Y3/8Y4 K3 clutch solenoid
• Y3/8Y5 B1 brake clutch solenoid
• Y3/8Y6 B2 brake clutch solenoid
• Y3/8Y7 B3 brake clutch solenoid
• Y3/8Y8 torque converter lockup solenoid

OEM Reference Numbers:

• A0034460310
• A0335457332
• A0335456732
• A0335456632
• 5WP21302K08
• 5WP21101
• 5WP21302K09
• A0002701700
• 000270170080
• A2202702906
• A2202703106
• A2202703206
• A2202701206
• A2202702106
• A2202701806
• A9062700006
• A2202701306
• A2202701506
• A2202702806
• A2202701906
• A2202702206
• A2202702406
• A2202700026
• A2702702306
• A2202700160
• A2122700006
• A2122700106
• A2202701406
• 7G TRONIC 722.9

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• Please ensure ALL fault codes are recorded and sent in with repair
• Conductor Plate must be seperated/removed from Valve Body, excess Transmission fluid cleaned and packed safely to avoid any physical damage during transit
• We can also offer replacement 722.9 conductor plates if the customers original unit is physically damaged or unrepairable. (Key, EIS and ESL also required in this case to program a replacement unit)

Common Faults:

• Transmission flaring or slipping between gear changes
• Transmission holding in gear
• Loss of all drive
• The following diagnostic fault codes may be logged:
• 0641 Fully integrated transmission control control unit Y3/8n4 is defective
• 0642 The voltage supply of the speed sensors is faulty.
• 0705 Component Y3/8s1 (Selection range sensor VGS) is defective
• 0706 Check component Y3/8s1 (Selection range sensor VGS)
• 0717 The signal from component Y3/8n1 (Turbine speed sensor VGS) is not available
• 0718 Component Y3/8n1 (Turbine speed sensor VGS) is defective
• 0722 The signal from component Y3/8n3 (Output speed sensor VGS) is not available
• 0723 Component Y3/8n3 (Output speed sensor VGS) is defective
• 0748 The internal electrical check of component Y3/8y2 (K1 clutch control solenoid valve VGS) has failed
• 0778 The internal electrical check of component Y3/8y5 (B1 brake control solenoid valve VGS) has failed
• 0798 The internal electrical check of component Y3/8y7 (B3 brake control solenoid valve VGS) has failed
• 2216 Check component Y3/8s1 (Selection range sensor VGS) The adaptation sequence occurred outside the valid range
• 2716 The internal electrical check of component Y3/8y4 (K3 clutch control solenoid valve VGS) has failed
• 2725 The internal electrical check of component Y3/8y6 (B2 brake control solenoid valve VGS) has failed
• 2734 The internal electrical check of component Y3/8y3 (K2 clutch control solenoid valve VGS) has failed
• 2759 The internal electrical check of component Y3/8y8 (Torque converter lockup clutch control solenoid valve VGS) has failed
• 2766 Excessive rpms have occurred at component Y3/8n2 (Internal speed sensor VGS)
• 2767 The signal from component Y3/8n2 (Internal speed sensor VGS) is not available
• 2768 Component Y3/8n2 (Internal speed sensor VGS) is defective
• 2810 The internal electrical check of component Y3/8y1 (Working pressure control solenoid valve VGS) has failed
• Y3/8N1 turbine speed sensor
• Y3/8N2 internal speed sensor
• Y3/8N3 output speed sensor
• Y3/8S1 selection range sensor
• Y3/8Y1 working pressure control solenoid
• Y3/8Y2 K1 clutch solenoid 
• Y3/8Y3 K2 clutch solenoid
• Y3/8Y4 K3 clutch solenoid
• Y3/8Y5 B1 brake clutch solenoid
• Y3/8Y6 B2 brake clutch solenoid
• Y3/8Y7 B3 brake clutch solenoid
• Y3/8Y8 torque converter lockup solenoid

OEM Reference Numbers:

• A0034460310
• A0335457332
• A0335456732
• A0335456632
• 5WP21302K08
• 5WP21101
• 5WP21302K09
• A0002701700
• 000270170080
• A2202702906
• A2202703106
• A2202703206
• A2202701206
• A2202702106
• A2202701806
• A9062700006
• A2202701306
• A2202701506
• A2202702806
• A2202701906
• A2202702206
• A2202702406
• A2202700026
• A2702702306
• A2202700160
• A2122700006
• A2122700106
• A2202701406
• 7G TRONIC 722.9