PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• Please ensure excess Transmission fluid cleaned and unit is packed safely to avoid any physical damage during transit
• Units are plug and play upon refitting

Common Faults:

• Unit goes into failsafe mode
• Fault code P1710 – ATF Temperature Sensor Circuit
• Fault code P0717 – Turbine Revolution Speed Sensor
• Fault code P0740 – TCC Solenoid Circuit
• Fault code P0744 – A/T TCC Solenoid Voltage Function
• Fault code P0745 – Line Pressure Solenoid Circuit
• Fault code P1752 – I/C Solenoid Circuit
• Fault code P1754 - I/C Solenoid Function
• Fault code P1757 - FR/B Solenoid Circuit
• Fault code P1759 - FR/B Solenoid Function
• Fault code P1762 - D/C Solenoid Circuit
• Fault code P1764 - D/C Solenoid Function
• Fault code P1767 - HLR/C Solenoid Circuit
• Fault code P1769 - HLR/C Solenoid Function
• Fault code P1772 - LC/B Solenoid Circuit
• Fault code P1774 - LC/B Solenoid Function
• Fault code P1815 - Manual Mode Switch Circuit
• Fault code P1841 - ATF Pressure Switch #1 Circuit
• Fault code P1843 - ATF Pressure Switch #3 Circuit
• Fault code P1845 - ATF Pressure Switch #5 Circuit
• Fault code P1846 - ATF Pressure Switch #6 Circuit

OEM Reference Numbers:

• 0260550002
• 31040-90X10
• 31705-EB30A
• RE5R05A
• 31705-08X2C
• 31705-3X40B
• 31705-4X40B
• 31705-EB50C
• JATCO
• JATCO RE5R05A

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.
• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play.

Important Information:

• This is a test and repair service of the customer's own unit.
• For testing & repairs to VZ Commodore / WL Statesman, the customer must send the ECM.
• The ECM is located on the front of the engine.

Common Faults:

• No crank
• Misfiring
• Fuel gauge error warning in dash cluster
• Injector circuit fault
• Fault code P0201 - Injector no.1 circuit malfunction
• Fault code P0202 - Injector no.2 circuit malfunction
• Fault code P0203 - Injector no.3 circuit malfunction
• Fault code P0204 - Injector no.4 circuit malfunction
• Fault code P0205 - Injector no.5 circuit malfunction
• Fault code P0206 - Injector no.6 circuit malfunction
• Fault code P0443 - Canister Purge Valve system malfunction

OEM Reference Numbers:

• 0261209022
• 0261209024
• 0261209025
• 0261209031
• 0261209060
• 0261209062
• 0261209063
• 0261209174
• 0261209184
• 12590358
• 12592002
• 12593783
• 12595974
• 12600940
• 12858514
• 92175385
• 92175386
• 92179450
• 92190063
• 92193809

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.
• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play.

Important Information:

• This is a test and repair service of the customer's own unit.
• For testing & repairs to VZ Commodore / WL Statesman, the customer must send the ECM.
• The ECM is located on the front of the engine.

Common Faults:

• No crank
• Misfiring
• Fuel gauge error warning in dash cluster
• Injector circuit fault
• Fault code P0201 - Injector no.1 circuit malfunction
• Fault code P0202 - Injector no.2 circuit malfunction
• Fault code P0203 - Injector no.3 circuit malfunction
• Fault code P0204 - Injector no.4 circuit malfunction
• Fault code P0205 - Injector no.5 circuit malfunction
• Fault code P0206 - Injector no.6 circuit malfunction
• Fault code P0443 - Canister Purge Valve system malfunction

OEM Reference Numbers:

• 0261209022
• 0261209024
• 0261209025
• 0261209031
• 0261209060
• 0261209062
• 0261209063
• 0261209174
• 0261209184
• 12590358
• 12592002
• 12593783
• 12595974
• 12600940
• 12858514
• 92175385
• 92175386
• 92179450
• 92190063
• 92193809

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a prompt test and repair service of the customers own unit
• NOTE: Please provide VIN and full fault description when sending unit to PEC for testing or repairs

Common Faults:

Instrument panel only illuminates for a second then blanks out

OEM Reference Numbers:

• 8301050520
• 2574100533
• 8301050590
• 8311050130
• 83001050011
• 25759628
• 1573107796

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a prompt test and repair service of the customers own unit

Common Faults:

• Display inoperative
• LCD screen missing segments

OEM Reference Numbers:

• 18F17
• AU210D885A
• F005C00012
• F005C00013
• F005C00015
• F005C00019
• X35003700TJ
• X35003700WC

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, BCM, and key for testing / repairs
• Only PCM can be sent for testing and repairing however upon fitting to the vehicle, a parameter reset will be required and can be done using most generic scantools

Common Faults:

• Forced throttle shutdown codes
• No start
• Transmission in limp home mode
• Missing on one cylinder
• Limited RPM codes
• No comms
• Losing fuel pump control
• Fault code P0230 - Fuel pump circuit malfunction
• Fault code P0753 - Transmission shift solenoid A malfunction
• Fault code P0758 - Transmission shift solenoid B malfunction
• Fault code P0763 - Transmission shift solenoid C malfunction
• Fault code P0768 - Transmission shift solenoid D malfunction
• Fault code P1465 - A/C relay circuit malfunction
• Fault code P1474 - Low fan control primary circuit malfunction

OEM Reference Numbers:

• 3R2312A650ALC
• 3R2312A650FG
• 3R23-12A650-FG
• ABU221
• ABU211
• 3R23-12A650-BG
• 3r23-12A650-BJ
• 3R2312A650BG
• 3R2312A650BJ
• 32BG

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, BCM, and key for testing / repairs
• Only PCM can be sent for testing and repairing however upon fitting to the vehicle, a parameter reset will be required and can be done using most generic scantools

Common Faults:

• Forced throttle shutdown codes
• No start
• Transmission in limp home mode
• Missing on one cylinder
• Limited RPM codes
• No comms
• Losing fuel pump control
• Fault code P0230 - Fuel pump circuit malfunction
• Fault code P0753 - Transmission shift solenoid A malfunction
• Fault code P0758 - Transmission shift solenoid B malfunction
• Fault code P0763 - Transmission shift solenoid C malfunction
• Fault code P0768 - Transmission shift solenoid D malfunction
• Fault code P1465 - A/C relay circuit malfunction
• Fault code P1474 - Low fan control primary circuit malfunction

OEM Reference Numbers:

• 3R2312A650ALC
• 3R2312A650FG
• 3R23-12A650-FG
• ABU221
• ABU211
• 3R23-12A650-BG
• 3r23-12A650-BJ
• 3R2312A650BG
• 3R2312A650BJ
• 32BG

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

This is a test and repair service of the customers own unit

Common Faults:

• No communication
• Wheel speed sensor faults
• Fault code 56 - Inlet valve solenoid open/short

OEM Reference Numbers:

• 47660VC000
• 47660VC200
• F01G09D039
• F01G09D035
• 11000031150
• 0130108100
• F01G09D03J
• 980200458
• E02611891341
• E02612851646
• E02612860640
• E02613861434
• E02614840642
• E02614852446

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a repair service of the customers own ABS module
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• ABS traction control lights on the dash
• Fault codes related to pump motor fault
• No communication between scan tool and ABS module
• Fault code C1061 - Pump motor and/or Pump motor drive circuit malfunction
• Fault code C1028 - Pressure sensor malfunction

NOTE: The following fault codes are also common but PEC CAN NOT test for or repair at this time

• Fault code C1043 - Master cylinder cut solenoid no.1 malfunction
• Fault code C1044 - Master cylinder cut solenoid no.2 malfunction

OEM Reference Numbers:

• 06210953933
• 06210210264
• 06210953303
• 06261931433
• 06261932031
• 06210960003
• 06261937201
• 06210217864
• 06210959553
• 06261936801
• 630144
• 06261937201
• 06210960003
• 06210218124
• 630144
• 5610077K0
• 5610078K8
• 06210953293
• 06210210294
• 06261953031
• 06210953943
• 06210310244
• 06261932961
• 06210218124
• 06210218124
• 06210951023
• 06210962693
• 06210210314
• 06210220604
• 06210959533
• 06261936781
• 06210217884
• 06210955603
• 06261933011
• 06219012004
• 68K7
• 68K8
• 68K5
• 68K6
• 77K0
• 77KO
• MK61
• ATE

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• Before removing unit from the motorcycle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• 5DF0 - ABS pump power supply
• 5DF1 - ABS pump power supply

OEM Reference Numbers:

• ATE
• 7682002
• 7715107
• 10096108633
• 10021450094
• 10061336971
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• A power window relearn will be required upon refitting 
• Exchange units are also available see 13574841CO - these units will require programming with GMH MDI / TIS

Common Faults:

• Ignition key locked in barrel, can not be removed
• Brake lights are not operating 
• Indicators not operating
• Transmission shifter locked in park, wont release
• AUX power / cigarette lighter has no power
• Boot release wont work
• Courtesy lights wont operate
• Park lamps inoperative
• Fault code B2585 - Left Park lamp control circuit malfunction
• Fault code B3867 - Right Park lamp control circuit malfunction
• Fault code B3883 - license plate lamp circuit malfunction
• Fault code U0140 - lost communication with BCM

OEM Reference Numbers:

• 13500385
• 13504449
• 13574841
• 13578421

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• PEC will require EIS, ESL and Key for testing/repairs

Common Faults:

• Some or all keys will not turn in the ignition barrell (EIS)
• Vehicle will not crank
• Fault codes in engine ECM - no start enable
• Fault codes in SAM for no terminal 15 and / or 15R
• No dash lights after starting
• Steering lock (ESL) will not unlock / disengage

OEM Reference Numbers:

• A9065453208
• A9065454208
• A6395450708
• 9065453208
• 9065454208
• 6395450708
• A2095450508
• 2095450508