PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation.

Common Faults:

• C0195 - hydro pump motor failure
• ABS pump motor related fault codes

OEM Reference Numbers:

• LNC2210BD
• LNC2210AD
• 10094610023
• 10094610033
• MK20
• 10020401034
• MNC592AC
• 3X9521
• MNF5920AD
• 10094910003
• 10020402204

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

•  This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

Fault code C2116 - Pump motor supply voltage low

OEM Reference Numbers:

• 115AD
• 25021202074
• 478AA
• CD564326
• ED784111
• ED797053
• P05105142AF
• P68091115AD
• P68212478AA
• P04877121AB
• 28526290003
• 25092850013
• 25061338613
• P52125441AE
• 25092841353
• 25061336363
• 000405276C2
• P52125462AC
• 000402639C4
• 25092843333
• 25061333563
• P04779492AJ
• P04779492AE
• 25092643933
• 25061015164
• 25092743353
• 25061330693
• 00403959C200
• 25092843063
• 25061333893
• P68028210AC
• P04877822AC
• 28526411013
• 25092851273
• 25061932193
• P68049210AC
• P52126282AC
• 210AC
• 8D615981
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

•  This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

Fault code C2116 - Pump motor supply voltage low

OEM Reference Numbers:

• 115AD
• 25021202074
• 478AA
• CD564326
• ED784111
• ED797053
• P05105142AF
• P68091115AD
• P68212478AA
• P04877121AB
• 28526290003
• 25092850013
• 25061338613
• P52125441AE
• 25092841353
• 25061336363
• 000405276C2
• P52125462AC
• 000402639C4
• 25092843333
• 25061333563
• P04779492AJ
• P04779492AE
• 25092643933
• 25061015164
• 25092743353
• 25061330693
• 00403959C200
• 25092843063
• 25061333893
• P68028210AC
• P04877822AC
• 28526411013
• 25092851273
• 25061932193
• P68049210AC
• P52126282AC
• 210AC
• 8D615981
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

•  This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

Fault code C2116 - Pump motor supply voltage low

OEM Reference Numbers:

• 115AD
• 25021202074
• 478AA
• CD564326
• ED784111
• ED797053
• P05105142AF
• P68091115AD
• P68212478AA
• P04877121AB
• 28526290003
• 25092850013
• 25061338613
• P52125441AE
• 25092841353
• 25061336363
• 000405276C2
• P52125462AC
• 000402639C4
• 25092843333
• 25061333563
• P04779492AJ
• P04779492AE
• 25092643933
• 25061015164
• 25092743353
• 25061330693
• 00403959C200
• 25092843063
• 25061333893
• P68028210AC
• P04877822AC
• 28526411013
• 25092851273
• 25061932193
• P68049210AC
• P52126282AC
• 210AC
• 8D615981
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a prompt test and repair service of the customers own unit

Common Faults:

• ABS pump runs constantly
• Intermittent operation

OEM Reference Numbers:

• 0265950525
• 0265235070
• 58910-2B850
• ESP 8.0

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

This is a prompt test & repair service of the customers own ABS module

Common Faults:

• Insufficent brake pressure
• ABS & ESP lights on

OEM Reference Numbers:

• 0265950497
• 0265235049
• 589101G900

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own ABS module.
• For Hydraulic block leakage issues refer to part number ABSMK70HREP
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• No communication with scan tool to ABS module
• ABS ETC fault code light on dash cluster
• Fault code U0415 - invalid data received from ABS
• Fault code U0401 - invalid dat received from ECM
• Fault code U0140 - invalid data received from BCM

OEM Reference Numbers:

• 06210955813
• 28570059023
• 06210213174
• 8V512M110AD
• AV592C405CC
• 10021206684
• 10096101543
• AV592C405FA
• AV592C405EA
• AV592C405DC
• AV592C405CC
• MK70

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own ABS module.
• For Hydraulic block leakage issues refer to part number ABSMK70HREP
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• No communication with scan tool to ABS module
• ABS ETC fault code light on dash cluster
• Fault code U0415 - invalid data received from ABS
• Fault code U0401 - invalid dat received from ECM
• Fault code U0140 - invalid data received from BCM

OEM Reference Numbers:

• 06210955813
• 28570059023
• 06210213174
• 8V512M110AD
• AV592C405CC
• 10021206684
• 10096101543
• AV592C405FA
• AV592C405EA
• AV592C405DC
• AV592C405CC
• MK70

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own ABS module.
• For Hydraulic block leakage issues refer to part number ABSMK70HREP
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• No communication with scan tool to ABS module
• ABS ETC fault code light on dash cluster
• Fault code U0415 - invalid data received from ABS
• Fault code U0401 - invalid dat received from ECM
• Fault code U0140 - invalid data received from BCM

OEM Reference Numbers:

• 06210955813
• 28570059023
• 06210213174
• 8V512M110AD
• AV592C405CC
• 10021206684
• 10096101543
• AV592C405FA
• AV592C405EA
• AV592C405DC
• AV592C405CC
• MK70

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

This is a test and repair service of the customers own unit

Common Faults:

• Wheel speed sensor faults
• No communication with a Scantool

OEM Reference Numbers:

• 637484504030
• 637489502573
• 637291519320
• 637384516840

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a prompt test and repair service of the customers own unit

Common Faults:

• Wheel speed sensor fault codes - C1200
• Pump motor circuit malfunction - C2402

OEM Reference Numbers:

• 100949-21003
• 10094921003
• 58920-39000
• 5892039000
• 10020401684
• 10094921043
• 100949-21043
• 10.0949-2104.3
• 10.0949-2100.3
• 95660-39400
• 9566039400

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own ABS module.
• For Hydraulic block leakage issues refer to part number ABSMK70HREP
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• No communication with scan tool to ABS module
• ABS ETC fault code light on dash cluster
• Fault code U0415 - invalid data received from ABS
• Fault code U0401 - invalid dat received from ECM
• Fault code U0140 - invalid data received from BCM

OEM Reference Numbers:

• 06210955813
• 28570059023
• 06210213174
• 8V512M110AD
• AV592C405CC
• 10021206684
• 10096101543
• AV592C405FA
• AV592C405EA
• AV592C405DC
• AV592C405CC
• MK70

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own ABS module.
• For Hydraulic block leakage issues refer to part number ABSMK70HREP
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• No communication with scan tool to ABS module
• ABS ETC fault code light on dash cluster
• Fault code U0415 - invalid data received from ABS
• Fault code U0401 - invalid dat received from ECM
• Fault code U0140 - invalid data received from BCM

OEM Reference Numbers:

• 06210955813
• 28570059023
• 06210213174
• 8V512M110AD
• AV592C405CC
• 10021206684
• 10096101543
• AV592C405FA
• AV592C405EA
• AV592C405DC
• AV592C405CC
• MK70

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own ABS module.
• For Hydraulic block leakage issues refer to part number ABSMK70HREP
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• No communication with scan tool to ABS module
• ABS ETC fault code light on dash cluster
• Fault code U0415 - invalid data received from ABS
• Fault code U0401 - invalid dat received from ECM
• Fault code U0140 - invalid data received from BCM

OEM Reference Numbers:

• 06210955813
• 28570059023
• 06210213174
• 8V512M110AD
• AV592C405CC
• 10021206684
• 10096101543
• AV592C405FA
• AV592C405EA
• AV592C405DC
• AV592C405CC
• MK70

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own ABS module.
• For Hydraulic block leakage issues refer to part number ABSMK70HREP
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• No communication with scan tool to ABS module
• ABS ETC fault code light on dash cluster
• Fault code U0415 - invalid data received from ABS
• Fault code U0401 - invalid dat received from ECM
• Fault code U0140 - invalid data received from BCM

OEM Reference Numbers:

• 06210955813
• 28570059023
• 06210213174
• 8V512M110AD
• AV592C405CC
• 10021206684
• 10096101543
• AV592C405FA
• AV592C405EA
• AV592C405DC
• AV592C405CC
• MK70

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

This is a test and/or repair service for the customers own unit

Common Faults:

• Wheel speed sensor faults
• No communication
• Fault code C0550 - Control unit performance/malfunction
• Fault code C0896 - Device voltage range/performance

OEM Reference Numbers:

• 689391512170
• Bosch 5.3
• 0265219506
• 0273004989
• 68938951421
• 689389514352
• 689392500950
• 689391503763

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own ABS module.
• For Hydraulic block leakage issues refer to part number ABSMK70HREP
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• No communication with scan tool to ABS module
• ABS ETC fault code light on dash cluster
• Fault code U0415 - invalid data received from ABS
• Fault code U0401 - invalid dat received from ECM
• Fault code U0140 - invalid data received from BCM

OEM Reference Numbers:

• 06210955813
• 28570059023
• 06210213174
• 8V512M110AD
• AV592C405CC
• 10021206684
• 10096101543
• AV592C405FA
• AV592C405EA
• AV592C405DC
• AV592C405CC
• MK70

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• ABS traction light on dash
• No communication with scan tool to ASB traction control module
• Engine light & Handbrake light illuminated in dash
• Fault code C0110 - Pump circuit malfunction
• Fault code C056D - Internal fault

OEM Reference Numbers:

• 10096145053
• 10061931141
• 13254641
• 10021203804
• 10096145083
• 10061933471
• 28561020103
• 10021204704
• 13254641