PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a prompt test and repair service of the customers own unit
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• C1288 - Pressure sensor circuit faulty
• No signal from wheel speed sensors

OEM Reference Numbers:

• 02610204694
• 06./2102-0469.4
• 06.2109-0940.3
• 06210204694
• 06210210914
• 06210214684
• 06210909403
• 06210956723
• 2161
• 8V512C405AE
• DF74437A0D
• DF74-437A0-D
• 062109-57653
• 285600-63003
• 062102-15484

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

•  This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

Fault code C2116 - Pump motor supply voltage low

OEM Reference Numbers:

• 115AD
• 25021202074
• 478AA
• CD564326
• ED784111
• ED797053
• P05105142AF
• P68091115AD
• P68212478AA
• P04877121AB
• 28526290003
• 25092850013
• 25061338613
• P52125441AE
• 25092841353
• 25061336363
• 000405276C2
• P52125462AC
• 000402639C4
• 25092843333
• 25061333563
• P04779492AJ
• P04779492AE
• 25092643933
• 25061015164
• 25092743353
• 25061330693
• 00403959C200
• 25092843063
• 25061333893
• P68028210AC
• P04877822AC
• 28526411013
• 25092851273
• 25061932193
• P68049210AC
• P52126282AC
• 210AC
• 8D615981
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a prompt test and repair service of the customers own unit
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor
• Pack unit very well to avoid damage during transit.

Common Faults:

• C1288 - Pressure sensor circuit faulty
• C0044 - Brake pressure sensor circuit A faulty
• BCM0130

OEM Reference Numbers:

• 000009525E4
• 00001395D0
• 00001395G0
• 000404063D0
• 0000405190E0
• 06210203424
• 06210203934
• 06210204694
• 06210204774
• 06210206234
• 06210207504
• 06210207844
• 06210208664
• 06210209954
• 06210210914
• 06210211554
• 06210214684
• 06210902993
• 06210905973
• 06210906983
• 06210905973
• 06210906983
• 06210909403
• 06210909833
• 06210909903
• 06210950173
• 06210950463
• 06210951533
• 06210953913
• 06210956723
• 06219007514
• 06219009814
• 10020600484
• 10020601374
• 10020601634
• 10020601664
• 10020601724
• 10020602164
• 10020602594
• 10020603014
• 10020603224
• 10020603304
• 10020603374
• 10020603724
• 10020603964
• 10020604094
• 10039929094
• 10039933304
• 10096001093
• 10096001113
• 10096001123
• 10096001133
• 10096001153
• 10096001193
• 10096001223
• 10096001253
• 10096001273
• 10096001293
• 10096001313
• 10096001333
• 10096001393
• 10096001413
• 2050
• 2125
• 2161
• 3M512C405AD
• 3M512C405AE
• 3M512C405AF
• 3M512C405DB
• 3M512C405EA
• 3M512C405HA
• 3M512C405HB
• 3M512C405HC
• 5N612C405AA
• 5N612C405AB
• 5N612C405CA
• 5N612C405CB
• 5N612C405CC
• 5N612C405GA
• 6M5Y2C405AB
• 6M5Y2C405AB
• 6N612C405AA
• 6N612C405EA
• 6N612C405GA
• 6N612C405GB
• 7N612C405AA
• 7N612C405CA
• 8M512B373AA
• 8M512C405AA
• 8M512C405EA
• 8V412C405AD
• 8V412C405AE
• 8V512C405AE
• 9M512C405AB
• 9V412C405CA
• B3TF437AZ
• BBY3437AZ
• BBY3437AZA
• BPYL437AZB
• BPYL437AZC
• BPYL437AZD
• BPYL437AZE
• BPYL437AZF
• BRYV437AZ
• BRYV437AZA
• C2Y0437AOC
• C2Y0437AZ
• C2Y0437AZA
• C2Y0437AZB
• C2Y0437AZD
• D2Y0437AOC
• DF74437AOC
• DF74437AOD

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

•  This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

Fault code C2116 - Pump motor supply voltage low

OEM Reference Numbers:

• 115AD
• 25021202074
• 478AA
• CD564326
• ED784111
• ED797053
• P05105142AF
• P68091115AD
• P68212478AA
• P04877121AB
• 28526290003
• 25092850013
• 25061338613
• P52125441AE
• 25092841353
• 25061336363
• 000405276C2
• P52125462AC
• 000402639C4
• 25092843333
• 25061333563
• P04779492AJ
• P04779492AE
• 25092643933
• 25061015164
• 25092743353
• 25061330693
• 00403959C200
• 25092843063
• 25061333893
• P68028210AC
• P04877822AC
• 28526411013
• 25092851273
• 25061932193
• P68049210AC
• P52126282AC
• 210AC
• 8D615981
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

•  This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

Fault code C2116 - Pump motor supply voltage low

OEM Reference Numbers:

• 115AD
• 25021202074
• 478AA
• CD564326
• ED784111
• ED797053
• P05105142AF
• P68091115AD
• P68212478AA
• P04877121AB
• 28526290003
• 25092850013
• 25061338613
• P52125441AE
• 25092841353
• 25061336363
• 000405276C2
• P52125462AC
• 000402639C4
• 25092843333
• 25061333563
• P04779492AJ
• P04779492AE
• 25092643933
• 25061015164
• 25092743353
• 25061330693
• 00403959C200
• 25092843063
• 25061333893
• P68028210AC
• P04877822AC
• 28526411013
• 25092851273
• 25061932193
• P68049210AC
• P52126282AC
• 210AC
• 8D615981
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

•  This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

Fault code C2116 - Pump motor supply voltage low

OEM Reference Numbers:

• 115AD
• 25021202074
• 478AA
• CD564326
• ED784111
• ED797053
• P05105142AF
• P68091115AD
• P68212478AA
• P04877121AB
• 28526290003
• 25092850013
• 25061338613
• P52125441AE
• 25092841353
• 25061336363
• 000405276C2
• P52125462AC
• 000402639C4
• 25092843333
• 25061333563
• P04779492AJ
• P04779492AE
• 25092643933
• 25061015164
• 25092743353
• 25061330693
• 00403959C200
• 25092843063
• 25061333893
• P68028210AC
• P04877822AC
• 28526411013
• 25092851273
• 25061932193
• P68049210AC
• P52126282AC
• 210AC
• 8D615981
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

•  This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

Fault code C2116 - Pump motor supply voltage low

OEM Reference Numbers:

• 115AD
• 25021202074
• 478AA
• CD564326
• ED784111
• ED797053
• P05105142AF
• P68091115AD
• P68212478AA
• P04877121AB
• 28526290003
• 25092850013
• 25061338613
• P52125441AE
• 25092841353
• 25061336363
• 000405276C2
• P52125462AC
• 000402639C4
• 25092843333
• 25061333563
• P04779492AJ
• P04779492AE
• 25092643933
• 25061015164
• 25092743353
• 25061330693
• 00403959C200
• 25092843063
• 25061333893
• P68028210AC
• P04877822AC
• 28526411013
• 25092851273
• 25061932193
• P68049210AC
• P52126282AC
• 210AC
• 8D615981
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

•  This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

Fault code C2116 - Pump motor supply voltage low

OEM Reference Numbers:

• 115AD
• 25021202074
• 478AA
• CD564326
• ED784111
• ED797053
• P05105142AF
• P68091115AD
• P68212478AA
• P04877121AB
• 28526290003
• 25092850013
• 25061338613
• P52125441AE
• 25092841353
• 25061336363
• 000405276C2
• P52125462AC
• 000402639C4
• 25092843333
• 25061333563
• P04779492AJ
• P04779492AE
• 25092643933
• 25061015164
• 25092743353
• 25061330693
• 00403959C200
• 25092843063
• 25061333893
• P68028210AC
• P04877822AC
• 28526411013
• 25092851273
• 25061932193
• P68049210AC
• P52126282AC
• 210AC
• 8D615981
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

•  This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

Fault code C2116 - Pump motor supply voltage low

OEM Reference Numbers:

• 115AD
• 25021202074
• 478AA
• CD564326
• ED784111
• ED797053
• P05105142AF
• P68091115AD
• P68212478AA
• P04877121AB
• 28526290003
• 25092850013
• 25061338613
• P52125441AE
• 25092841353
• 25061336363
• 000405276C2
• P52125462AC
• 000402639C4
• 25092843333
• 25061333563
• P04779492AJ
• P04779492AE
• 25092643933
• 25061015164
• 25092743353
• 25061330693
• 00403959C200
• 25092843063
• 25061333893
• P68028210AC
• P04877822AC
• 28526411013
• 25092851273
• 25061932193
• P68049210AC
• P52126282AC
• 210AC
• 8D615981
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

•  This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

Fault code C2116 - Pump motor supply voltage low

OEM Reference Numbers:

• 115AD
• 25021202074
• 478AA
• CD564326
• ED784111
• ED797053
• P05105142AF
• P68091115AD
• P68212478AA
• P04877121AB
• 28526290003
• 25092850013
• 25061338613
• P52125441AE
• 25092841353
• 25061336363
• 000405276C2
• P52125462AC
• 000402639C4
• 25092843333
• 25061333563
• P04779492AJ
• P04779492AE
• 25092643933
• 25061015164
• 25092743353
• 25061330693
• 00403959C200
• 25092843063
• 25061333893
• P68028210AC
• P04877822AC
• 28526411013
• 25092851273
• 25061932193
• P68049210AC
• P52126282AC
• 210AC
• 8D615981
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

•  This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

Fault code C2116 - Pump motor supply voltage low

OEM Reference Numbers:

• 115AD
• 25021202074
• 478AA
• CD564326
• ED784111
• ED797053
• P05105142AF
• P68091115AD
• P68212478AA
• P04877121AB
• 28526290003
• 25092850013
• 25061338613
• P52125441AE
• 25092841353
• 25061336363
• 000405276C2
• P52125462AC
• 000402639C4
• 25092843333
• 25061333563
• P04779492AJ
• P04779492AE
• 25092643933
• 25061015164
• 25092743353
• 25061330693
• 00403959C200
• 25092843063
• 25061333893
• P68028210AC
• P04877822AC
• 28526411013
• 25092851273
• 25061932193
• P68049210AC
• P52126282AC
• 210AC
• 8D615981
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

•  This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

Fault code C2116 - Pump motor supply voltage low

OEM Reference Numbers:

• 115AD
• 25021202074
• 478AA
• CD564326
• ED784111
• ED797053
• P05105142AF
• P68091115AD
• P68212478AA
• P04877121AB
• 28526290003
• 25092850013
• 25061338613
• P52125441AE
• 25092841353
• 25061336363
• 000405276C2
• P52125462AC
• 000402639C4
• 25092843333
• 25061333563
• P04779492AJ
• P04779492AE
• 25092643933
• 25061015164
• 25092743353
• 25061330693
• 00403959C200
• 25092843063
• 25061333893
• P68028210AC
• P04877822AC
• 28526411013
• 25092851273
• 25061932193
• P68049210AC
• P52126282AC
• 210AC
• 8D615981
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

•  This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

Fault code C2116 - Pump motor supply voltage low

OEM Reference Numbers:

• 115AD
• 25021202074
• 478AA
• CD564326
• ED784111
• ED797053
• P05105142AF
• P68091115AD
• P68212478AA
• P04877121AB
• 28526290003
• 25092850013
• 25061338613
• P52125441AE
• 25092841353
• 25061336363
• 000405276C2
• P52125462AC
• 000402639C4
• 25092843333
• 25061333563
• P04779492AJ
• P04779492AE
• 25092643933
• 25061015164
• 25092743353
• 25061330693
• 00403959C200
• 25092843063
• 25061333893
• P68028210AC
• P04877822AC
• 28526411013
• 25092851273
• 25061932193
• P68049210AC
• P52126282AC
• 210AC
• 8D615981
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

•  This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

Fault code C2116 - Pump motor supply voltage low

OEM Reference Numbers:

• 115AD
• 25021202074
• 478AA
• CD564326
• ED784111
• ED797053
• P05105142AF
• P68091115AD
• P68212478AA
• P04877121AB
• 28526290003
• 25092850013
• 25061338613
• P52125441AE
• 25092841353
• 25061336363
• 000405276C2
• P52125462AC
• 000402639C4
• 25092843333
• 25061333563
• P04779492AJ
• P04779492AE
• 25092643933
• 25061015164
• 25092743353
• 25061330693
• 00403959C200
• 25092843063
• 25061333893
• P68028210AC
• P04877822AC
• 28526411013
• 25092851273
• 25061932193
• P68049210AC
• P52126282AC
• 210AC
• 8D615981
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a prompt test and repair service of the customers own unit
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress
• Pack unit very well to avoid damage during transportation

Common Faults:

• ABS light on
• Hard brake pedal 
• Fault code C1256 - Accumulator low pressure
• Fault code C1391 - Abnormal leak of Accumulator pressure
• Fault code C1252 - Brake booster pump motor ON time abnormally long
• Fault code C1253 - Hydro booster pump motor relay malfunction

OEM Reference Numbers:

• 4451030270
• 1TH191053
• 4451030290
• 4451030270
• 4451030250

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a prompt test and repair service of the customers own unit
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress
• Pack unit very well to avoid damage during transportation

Common Faults:

• ABS light on
• Hard brake pedal 
• Fault code C1256 - Accumulator low pressure
• Fault code C1391 - Abnormal leak of Accumulator pressure
• Fault code C1252 - Brake booster pump motor ON time abnormally long
• Fault code C1253 - Hydro booster pump motor relay malfunction

OEM Reference Numbers:

• 4451030270
• 1TH191053
• 4451030290
• 4451030270
• 4451030250

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

•  This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

Fault code C2116 - Pump motor supply voltage low

OEM Reference Numbers:

• 115AD
• 25021202074
• 478AA
• CD564326
• ED784111
• ED797053
• P05105142AF
• P68091115AD
• P68212478AA
• P04877121AB
• 28526290003
• 25092850013
• 25061338613
• P52125441AE
• 25092841353
• 25061336363
• 000405276C2
• P52125462AC
• 000402639C4
• 25092843333
• 25061333563
• P04779492AJ
• P04779492AE
• 25092643933
• 25061015164
• 25092743353
• 25061330693
• 00403959C200
• 25092843063
• 25061333893
• P68028210AC
• P04877822AC
• 28526411013
• 25092851273
• 25061932193
• P68049210AC
• P52126282AC
• 210AC
• 8D615981
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

•  This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

Fault code C2116 - Pump motor supply voltage low

OEM Reference Numbers:

• 115AD
• 25021202074
• 478AA
• CD564326
• ED784111
• ED797053
• P05105142AF
• P68091115AD
• P68212478AA
• P04877121AB
• 28526290003
• 25092850013
• 25061338613
• P52125441AE
• 25092841353
• 25061336363
• 000405276C2
• P52125462AC
• 000402639C4
• 25092843333
• 25061333563
• P04779492AJ
• P04779492AE
• 25092643933
• 25061015164
• 25092743353
• 25061330693
• 00403959C200
• 25092843063
• 25061333893
• P68028210AC
• P04877822AC
• 28526411013
• 25092851273
• 25061932193
• P68049210AC
• P52126282AC
• 210AC
• 8D615981
• MK61