PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a prompt test and repair service of the customers own unit
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off HBB/ABS unit and pipes.

Common Faults:

• ABS light on
• Brake pedal goes hard
• ABS pump motor failure
• Fault code 57 - Accumulator pressure system malfunction
• Fault code 54 - Pump motor relay malfunction
• Fault code 58 - Pressure switch malfunction
• Fault code 53 - Motor relay circuit open or shorted

NOTE: Contact PEC before sending your unit if your fault code or symptoms are not listed above

OEM Reference Numbers:

• MR569728
• 1930807D09975
• 2300895G10265
• 2020072D02992
• MR977461
• MR407202
• 0H05882

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• No communication with scan tool to ABS module
• ABS traction light on instrument cluster 
• Fault codes related to pump voltage fault
• Fault code C1073 - faulty motor drive circuit
• Fault code C2116 - abnormality in power supply voltage in pump motor
• Fault code C2104 - faulty valve power supply circuit
• Fault code C1200 - wheel speed sensor signal open
• Fault code C2200 - module internal error
• Fault code P1773 - malfunction of ABS 

OEM Reference Numbers:

• 06210957383
• 06261335251
• 28561128013
• 4670A502
• 06210215334
• 06210956653
• 06261334091
• ATE
• 28561166003
• 4670A455
• 06210215164

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation. 

Common Faults:

• No communication with scan tool to ABS module
• ABS traction light on instrument cluster 
• Fault codes related to pump voltage fault
• Fault code C1073 - faulty motor drive circuit
• Fault code C2116 - abnormality in power supply voltage in pump motor
• Fault code C2104 - faulty valve power supply circuit
• Fault code C1200 - wheel speed sensor signal open
• Fault code C2200 - module internal error
• Fault code P1773 - malfunction of ABS 

OEM Reference Numbers:

• 06210957383
• 06261335251
• 28561128013
• 4670A502
• 06210215334
• 06210956653
• 06261334091
• ATE
• 28561166003
• 4670A455
• 06210215164

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a prompt test and repair service of the customers own unit
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off HBB/ABS unit and pipes.

Common Faults:

• ABS light on
• Brake pedal goes hard
• ABS pump motor failure
• Fault code 57 - Accumulator pressure system malfunction
• Fault code 54 - Pump motor relay malfunction
• Fault code 58 - Pressure switch malfunction
• Fault code 53 - Motor relay circuit open or shorted

NOTE: Contact PEC before sending your unit if your fault code or symptoms are not listed above

OEM Reference Numbers:

• MR569728
• 1930807D09975
• 2300895G10265
• 2020072D02992
• MR977461
• MR407202
• 0H05882

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a prompt test and repair service of the customers own unit
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off HBB/ABS unit and pipes.

Common Faults:

• ABS light on
• Brake pedal goes hard
• ABS pump motor failure
• Fault code 57 - Accumulator pressure system malfunction
• Fault code 54 - Pump motor relay malfunction
• Fault code 58 - Pressure switch malfunction
• Fault code 53 - Motor relay circuit open or shorted

NOTE: Contact PEC before sending your unit if your fault code or symptoms are not listed above

OEM Reference Numbers:

• MR569728
• 1930807D09975
• 2300895G10265
• 2020072D02992
• MR977461
• MR407202
• 0H05882

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation

Common Faults:

Fault code C0020 - ABS pump motor faulty

OEM Reference Numbers:

• P03736633
• 1050
• 10096104033
• 10021200424
• 1080
• P31317378
• 10096104083
• P30761115
• 6G9N2C405CE
• 10096104043
• 1068
• 10021200684

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service for Mazda/Ford MK70 ABS Module
• For Hydraulic block leakage issues refer to part number ABSMK70HREP
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation.

Common Faults:

• Speedometer in-operative
• Wheel speed sensor faults
• No communication with scan tool to ABS module
• ABS ETC fault code light on dash cluster
• Fault code U0415 - invalid data received from ABS
• Fault code U0401 - invalid data received from ECM
• Fault code U0140 - invalid data received from BCM

OEM Reference Numbers:

• 00402662E3
• 10020700714
• 10097001053
• 10097001083
• 10097001243
• 3M512M100JA
• 7G37E17L78
• ATE
• MK70

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation

Common Faults:

• Hydraulic pump fault
• ABS pump motor malfunction
• ABS Cannot communicate with scan tool or other modules in car
• Can Bus not active (disconnect ABS and Retest)
• Vehicle will not start
• Error code for one or more wheel speed sensors cannot be erased

OEM Reference Numbers:

• 285611-37023
• 28561137023
• 100961-14373
• 10096114373
• 100619-32361
• 10061932361
• 95CT2AAY2
• MK61
• 1084
• 476600002R
• 91CT2AAY2
• 10096114053
• 10021201574
• 476600006R
• 10096114103
• 10021202374
• 476600047R
• 10096114193
• 10021201834
• 476601563R
• 10096114473
• 10021204664
• 476602642R
• 10096114463
• 10021204234
• 476604709R
• 10096114753
• 10021208164
• 476606075R
• 10096114613
• 10021205364
• 476606264R
• 10096114123
• 10021203464
• 476608102R
• 10096114563
• 10021204604
• 476608247R
• 10096114113
• 10021203404

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation

Common Faults:

Fault code C0020 - ABS pump motor faulty

OEM Reference Numbers:

• P03736633
• 1050
• 10096104033
• 10021200424
• 1080
• P31317378
• 10096104083
• P30761115
• 6G9N2C405CE
• 10096104043
• 1068
• 10021200684

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service for Mazda/Ford MK70 ABS Module
• For Hydraulic block leakage issues refer to part number ABSMK70HREP
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation.

Common Faults:

• Speedometer in-operative
• Wheel speed sensor faults
• No communication with scan tool to ABS module
• ABS ETC fault code light on dash cluster
• Fault code U0415 - invalid data received from ABS
• Fault code U0401 - invalid data received from ECM
• Fault code U0140 - invalid data received from BCM

OEM Reference Numbers:

• 00402662E3
• 10020700714
• 10097001053
• 10097001083
• 10097001243
• 3M512M100JA
• 7G37E17L78
• ATE
• MK70

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• Pack unit very well to avoid damage during transportation.

Common Faults:

• Abs light staying on
• Wheel speed sensor fault codes

OEM Reference Numbers:

• 265188507200
• 265966507615
• 265082503636
• 26596650956

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation

Common Faults:

• Hydraulic pump fault
• ABS pump motor malfunction
• ABS Cannot communicate with scan tool or other modules in car
• Can Bus not active (disconnect ABS and Retest)
• Vehicle will not start
• Error code for one or more wheel speed sensors cannot be erased

OEM Reference Numbers:

• 285611-37023
• 28561137023
• 100961-14373
• 10096114373
• 100619-32361
• 10061932361
• 95CT2AAY2
• MK61
• 1084
• 476600002R
• 91CT2AAY2
• 10096114053
• 10021201574
• 476600006R
• 10096114103
• 10021202374
• 476600047R
• 10096114193
• 10021201834
• 476601563R
• 10096114473
• 10021204664
• 476602642R
• 10096114463
• 10021204234
• 476604709R
• 10096114753
• 10021208164
• 476606075R
• 10096114613
• 10021205364
• 476606264R
• 10096114123
• 10021203464
• 476608102R
• 10096114563
• 10021204604
• 476608247R
• 10096114113
• 10021203404

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service for Mazda/Ford MK70 ABS Module
• For Hydraulic block leakage issues refer to part number ABSMK70HREP
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation.

Common Faults:

• Speedometer in-operative
• Wheel speed sensor faults
• No communication with scan tool to ABS module
• ABS ETC fault code light on dash cluster
• Fault code U0415 - invalid data received from ABS
• Fault code U0401 - invalid data received from ECM
• Fault code U0140 - invalid data received from BCM

OEM Reference Numbers:

• 00402662E3
• 10020700714
• 10097001053
• 10097001083
• 10097001243
• 3M512M100JA
• 7G37E17L78
• ATE
• MK70

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation

Common Faults:

• Hydraulic pump fault
• ABS pump motor malfunction
• ABS Cannot communicate with scan tool or other modules in car
• Can Bus not active (disconnect ABS and Retest)
• Vehicle will not start
• Error code for one or more wheel speed sensors cannot be erased

OEM Reference Numbers:

• 062109-56923
• 062613-34833
• 285261-82013
• 47990-JF03A
• 062102-15114
• MK61

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• Before removing unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust / grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• ABS module must be left attached to hydraulic block and motor.
• Pack unit very well to avoid damage during transportation

Common Faults:

• Hydraulic pump fault
• ABS pump motor malfunction
• ABS Cannot communicate with scan tool or other modules in car
• Can Bus not active (disconnect ABS and Retest)
• Vehicle will not start
• Error code for one or more wheel speed sensors cannot be erased

OEM Reference Numbers:

• 285611-37023
• 28561137023
• 100961-14373
• 10096114373
• 100619-32361
• 10061932361
• 95CT2AAY2
• MK61
• 1084
• 476600002R
• 91CT2AAY2
• 10096114053
• 10021201574
• 476600006R
• 10096114103
• 10021202374
• 476600047R
• 10096114193
• 10021201834
• 476601563R
• 10096114473
• 10021204664
• 476602642R
• 10096114463
• 10021204234
• 476604709R
• 10096114753
• 10021208164
• 476606075R
• 10096114613
• 10021205364
• 476606264R
• 10096114123
• 10021203464
• 476608102R
• 10096114563
• 10021204604
• 476608247R
• 10096114113
• 10021203404

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• Before removing the unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust/grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• For repairs to common faults listed only the ABS module is required
• Pack unit very well to avoid damage during transportation

Common Faults:

• Fault code 5001 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5944 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5945 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• ABS / ESP inoperative appears in dash cluster
• Power steering malfunction appears in dash cluster
• Fault code in various modules related to Loss of communication with ABS module

OEM Reference Numbers:

• A2045453932
• A2045455432
• A2049012500
• A2049012300
• A0375456332
• A1729014100
• A1724312512
• A1729014000
• 10092623603
• 10061935531
• 10092623593
• A1724315912
• A2045455132
• A2215458732
• 10092615863
• 28526037023
• 100961336281

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• Before removing the unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust/grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• For repairs to common faults listed only the ABS module is required
• Pack unit very well to avoid damage during transportation

Common Faults:

• Fault code 5001 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5944 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5945 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• ABS / ESP inoperative appears in dash cluster
• Power steering malfunction appears in dash cluster
• Fault code in various modules related to Loss of communication with ABS module

OEM Reference Numbers:

• A2045453932
• A2045455432
• A2049012500
• A2049012300
• A0375456332
• A1729014100
• A1724312512
• A1729014000
• 10092623603
• 10061935531
• 10092623593
• A1724315912
• A2045455132
• A2215458732
• 10092615863
• 28526037023
• 100961336281

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• Before removing the unit from the vehicle, check and record all fault codes. Supply these and any other diagnostic information when sending unit to PEC.
• Before removing pipes, clean all dust/grit off ABS module and pipes.
• When pipes have been removed, seal all holes in ABS hydraulic block to ensure no dirt ingress.
• For repairs to common faults listed only the ABS module is required
• Pack unit very well to avoid damage during transportation

Common Faults:

• Fault code 5001 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5944 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• Fault code 5945 - there is an internal fault in control unit N30/4 - (electronic stability program control unit)
• ABS / ESP inoperative appears in dash cluster
• Power steering malfunction appears in dash cluster
• Fault code in various modules related to Loss of communication with ABS module

OEM Reference Numbers:

• A2045453932
• A2045455432
• A2049012500
• A2049012300
• A0375456332
• A1729014100
• A1724312512
• A1729014000
• 10092623603
• 10061935531
• 10092623593
• A1724315912
• A2045455132
• A2215458732
• 10092615863
• 28526037023
• 100961336281