PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, key and key reader / immobiliser for testing / repairs

Common Faults:

• No start 
• No injector pulse
• ECM main relay drive circuit failure

OEM Reference Numbers:

• E6T36497
• MN122228

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, key and key reader / immobiliser for testing / repairs.

Common Faults:

• No throttle response
• No start
• Intermittently going into Limp Home Mode
• Fault code P2138 - Accelerator pedal position sensor (main and sub) range/performance
• Fault code P2135 - Throttle /pedal position sensor/switch A/B voltage correlation

OEM Reference Numbers:

• 8631A127
• E6T45584
• 8631A310
• MN171417
• E6T41881

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• The customer must send the ECM & Key for testing / repairs

Common Faults:

• Dropping cylinders when warm
• Running rough
• No power to injectors
• Fault code 4906 - The feedback of the second-row plunger pump is short on the weight

OEM Reference Numbers:

• 0014466440
• 0004461840
• 0064463640
• 0004467440
• 0044467140
• 0004468440
• 0014462040
• 0014462240
• 0034462940
• A0114479140
• A0214461640
• 54292000109543
• 00006351A8
• 00006351B1
• 00006395A8
• 00006395A9
• 00006395B0
• 00006395B1
• 00006403A2
• 0001501279
• 0001502779
• 0004461540
• 0004461840
• 0004463940
• 0004464240
• 0004466640
• 0004467240
• 0004467440
• 0004467840
• 0004468540
• 0014462040
• 0014462240
• 0014463240
• 0014466440
• 0044467140
• 0044467340
• 0054460840
• 0054460640
• 0054460940
• 0064463640
• 0074462840
• 0074465040
• 0074466040
• 3X0789
• 3X4003
• 3X4003A5
• 3X6310A4
• 3X6402A2
• 3X6402A3
• 3X6403A2
• 3X9010
• A0114479140
• A0214461640
• A0414466540
• A5414464140
• A9044468140
• A9064466840
• PLD
• TEMIC
• ML-PLD

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• The customer must send the ECM, key, key reader/immobiliser for testing / repairs.

Common Faults:

• Misfiring 
• No start
• No idle control
• Fault code 44 - Ignition coil fault (cylinders 1 & 4) 
• Fault code 52 - Ignition coil fault (cylinders 2 & 5) 
• Fault code 53 - Ignition coil fault (cylinders 3 & 6)

OEM Reference Numbers:

• 8631A238
• E6T49780
• MR515130
• E2T79374
• 1860A132
• E6T38395

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• The customer must send the ECM, key, key reader/immobiliser for testing / repairs.

Common Faults:

• Misfiring 
• No start
• No idle control
• Fault code 44 - Ignition coil fault (cylinders 1 & 4) 
• Fault code 52 - Ignition coil fault (cylinders 2 & 5) 
• Fault code 53 - Ignition coil fault (cylinders 3 & 6)

OEM Reference Numbers:

• 8631A238
• E6T49780
• MR515130
• E2T79374
• 1860A132
• E6T38395

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, key and key reader / immobiliser for testing / repairs.

Common Faults:

• No throttle response
• No start
• Intermittently going into Limp Home Mode
• Fault code P2138 - Accelerator pedal position sensor (main and sub) range/performance
• Fault code P2135 - Throttle /pedal position sensor/switch A/B voltage correlation

OEM Reference Numbers:

• 8631A127
• E6T45584
• 8631A310
• MN171417
• E6T41881

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• The customer must send the ECM & Key for testing / repairs

Common Faults:

• Dropping cylinders when warm
• Running rough
• No power to injectors
• Fault code 4906 - The feedback of the second-row plunger pump is short on the weight

OEM Reference Numbers:

• 0014466440
• 0004461840
• 0064463640
• 0004467440
• 0044467140
• 0004468440
• 0014462040
• 0014462240
• 0034462940
• A0114479140
• A0214461640
• 54292000109543
• 00006351A8
• 00006351B1
• 00006395A8
• 00006395A9
• 00006395B0
• 00006395B1
• 00006403A2
• 0001501279
• 0001502779
• 0004461540
• 0004461840
• 0004463940
• 0004464240
• 0004466640
• 0004467240
• 0004467440
• 0004467840
• 0004468540
• 0014462040
• 0014462240
• 0014463240
• 0014466440
• 0044467140
• 0044467340
• 0054460840
• 0054460640
• 0054460940
• 0064463640
• 0074462840
• 0074465040
• 0074466040
• 3X0789
• 3X4003
• 3X4003A5
• 3X6310A4
• 3X6402A2
• 3X6402A3
• 3X6403A2
• 3X9010
• A0114479140
• A0214461640
• A0414466540
• A5414464140
• A9044468140
• A9064466840
• PLD
• TEMIC
• ML-PLD

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• The customer must send the ECM & Key for testing / repairs

Common Faults:

• Dropping cylinders when warm
• Running rough
• No power to injectors
• Fault code 4906 - The feedback of the second-row plunger pump is short on the weight

OEM Reference Numbers:

• 0014466440
• 0004461840
• 0064463640
• 0004467440
• 0044467140
• 0004468440
• 0014462040
• 0014462240
• 0034462940
• A0114479140
• A0214461640
• 54292000109543
• 00006351A8
• 00006351B1
• 00006395A8
• 00006395A9
• 00006395B0
• 00006395B1
• 00006403A2
• 0001501279
• 0001502779
• 0004461540
• 0004461840
• 0004463940
• 0004464240
• 0004466640
• 0004467240
• 0004467440
• 0004467840
• 0004468540
• 0014462040
• 0014462240
• 0014463240
• 0014466440
• 0044467140
• 0044467340
• 0054460840
• 0054460640
• 0054460940
• 0064463640
• 0074462840
• 0074465040
• 0074466040
• 3X0789
• 3X4003
• 3X4003A5
• 3X6310A4
• 3X6402A2
• 3X6402A3
• 3X6403A2
• 3X9010
• A0114479140
• A0214461640
• A0414466540
• A5414464140
• A9044468140
• A9064466840
• PLD
• TEMIC
• ML-PLD

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• The customer must send the ECM, key, key reader/immobiliser for testing / repairs.

Common Faults:

• Misfiring 
• No start
• No idle control
• Fault code 44 - Ignition coil fault (cylinders 1 & 4) 
• Fault code 52 - Ignition coil fault (cylinders 2 & 5) 
• Fault code 53 - Ignition coil fault (cylinders 3 & 6)

OEM Reference Numbers:

• 8631A238
• E6T49780
• MR515130
• E2T79374
• 1860A132
• E6T38395

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a prompt test and repair service of the customers own unit
• Please see additional information before sending to PEC

Common Faults:

• No start
• Fault code P0513 - immobiliser error

OEM Reference Numbers:

• 1085101526
• 1085-101526
• 37820PEAQ50
• 37820RFEU53
• 37820RFEU52
• 37820-RFE-U52
• 37820-RFE-U53
• 37820-PEA-Q50

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• The customer must send the ECM, key, Reader / immobiliser and key for testing / repairs
• If the ECM is repaired for an idle speed fault, the customer must fit a new idle speed controller before refitting the repaired ECM. Part number IAC570

Common Faults:

• Idle speed control fault
• No start
• Fault code P0505 - Idle air control system malfunction
• Fault code P0100 - Mass air flow circuit control malfunction

OEM Reference Numbers:

• 237106M911
• 237106M916
• MEC13110
• MEC13111
• MEC13120
• MEC13130
• MEC13131
• MEC13140
• MEC13141
• MEC13142
• MEC13360
• MEC13381
• MEC13-110
• MEC13-111
• MEC13-120
• MEC13-130
• MEC13-131
• MEC13-140
• MEC13-141
• MEC13-142
• MEC13-360
• MEC13-381

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• The customer must send the ECM, key, Reader / immobiliser and key for testing / repairs
• If the ECM is repaired for an idle speed fault, the customer must fit a new idle speed controller before refitting the repaired ECM. Part number IAC570

Common Faults:

• Idle speed control fault
• No start
• Fault code P0505 - Idle air control system malfunction
• Fault code P0100 - Mass air flow circuit control malfunction

OEM Reference Numbers:

• 237106M911
• 237106M916
• MEC13110
• MEC13111
• MEC13120
• MEC13130
• MEC13131
• MEC13140
• MEC13141
• MEC13142
• MEC13360
• MEC13381
• MEC13-110
• MEC13-111
• MEC13-120
• MEC13-130
• MEC13-131
• MEC13-140
• MEC13-141
• MEC13-142
• MEC13-360
• MEC13-381

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, Key, CAS (immobiliser), Key reader & Ignition Switch for testing & repairs

Common Faults:

• Misfiring
• No start
• No output to ignition coils
• Units are prone to have water damage due to ECU compartment not draining properly or rust damage

OEM Reference Numbers:

• MS45
• 5WK93004
• 5WK93008
• 5WK93010
• 5WK93011
• 5WK93014
• 5WK93016
• 5WK93018
• 5WK93020
• 7527072
• 7527730
• 7530260
• 7531440
• 7532140
• 7532142
• 7533651
• 7541335
• 7543157
• 7548769
• 7548770
• 7549387
• 7561380
• DMEMS450
• MS45.0

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, key, key reader and immobiliser for testing / repairs

Common Faults:

• Engine misfiring
• Premature failure of ignition coils
• No Start

OEM Reference Numbers:

• BP6R18881
• BP6R18881B
• BP6R18881C
• BP6R18881D
• BP6R18881R
• 279700-1282
• 2797001282

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

This is a test and repair service of the customers own unit.

Common Faults:

• Misfiring
• Premature failure of ignition coils

OEM Reference Numbers:

• MEC34222
• 23710GZ63B

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, key, key reader and immobiliser for testing / repairs

Common Faults:

• Engine misfiring
• Premature failure of ignition coils
• No Start

OEM Reference Numbers:

• BP6R18881
• BP6R18881B
• BP6R18881C
• BP6R18881D
• BP6R18881R
• 279700-1282
• 2797001282

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit

Common Faults:

• Fault code P0180 - Fuel temp sensor interruption
• Fault code P0115 - Coolant temp sensor interruption

OEM Reference Numbers:

• 0281001537
• 0281001892
• 0281010463
• 0281010464
• 0281010872
• 0281010966
• 0281010967
• 0281020043
• 0281020106
• 0986283142
• 0986283467
• EDC MS 6.3

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• The customer must send the ECM, key, key reader & Smart Entrance Module (SEM) for testing/repairs

Common Faults:

• Misfiring
• No start
• No throttle control
• Fault code P2122 - TPS voltage low
• Fault code P2127 - APPS voltage low

OEM Reference Numbers:

• MEC32-300
• MEC32300
• A56U62
• MEC32-290
• MEC32290
• MEC32-290 B1 2X08