PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, key, key reader and immobiliser for testing / repairs

Common Faults:

• Transmission direct clutch failure
• ECM does not fully release the direct clutch solenoid
• No start
• Fault code P0607 - Control module performance
• Fault code P0335 - Crank signal missing 
• Fault code P0339 - Crank circuit intermittant
• Fault code P0341 - Camshaft signal out of range
• Fault code P0750 - Transmission shift solenoid A malfunction
• Fault code P0753 - Transmission shift solenoid A electrical
• Fault code P0755 - Transmission shift solenoid B malfunction
• Fault code P0758 - Transmission shift solenoid B electrical
• Fault code P1760 - Shift solenoid SLT malfunction stored

OEM Reference Numbers:

• 8966142B21
• 8966142B20
• 8966142B40
• 8966142B10
• 8966142B11
• 2120001351

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, key, key reader and immobiliser for testing / repairs

Common Faults:

• Transmission direct clutch failure
• ECM does not fully release the direct clutch solenoid
• No start
• Fault code P0607 - Control module performance
• Fault code P0335 - Crank signal missing 
• Fault code P0339 - Crank circuit intermittant
• Fault code P0341 - Camshaft signal out of range
• Fault code P0750 - Transmission shift solenoid A malfunction
• Fault code P0753 - Transmission shift solenoid A electrical
• Fault code P0755 - Transmission shift solenoid B malfunction
• Fault code P0758 - Transmission shift solenoid B electrical
• Fault code P1760 - Shift solenoid SLT malfunction stored

OEM Reference Numbers:

• 8966142B21
• 8966142B20
• 8966142B40
• 8966142B10
• 8966142B11
• 2120001351

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, key, key reader and immobiliser to testing / repairs.

Common Faults:

• No start
• No spark
• No injector pulse
• Immobiliser faults

OEM Reference Numbers:

• 2110005960
• 8966142340

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, key, key reader and immobiliser to testing / repairs.

Common Faults:

• No start
• No spark
• No injector pulse
• Immobiliser faults

OEM Reference Numbers:

• 2110005960
• 8966142340

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, Key, Key reader & Immobiliser for testing / repairs

Common Faults:

• Transmission direct clutch failure
• ECM does not fully release the direct clutch solenoid
• No start
• Fault code P0607 - Control module performance
• Fault code P0335 - Crank signal missing 
• Fault code P0339 - Crank circuit intermittant
• Fault code P0341 - Camshaft signal out of range
• Fault code P0750 - Transmission shift solenoid A malfunction
• Fault code P0753 - Transmission shift solenoid A electrical
• Fault code P0755 - Transmission shift solenoid B malfunction
• Fault code P0758 - Transmission shift solenoid B electrical
• Fault code P1760 - Shift solenoid SLT malfunction stored

OEM Reference Numbers:

• 8966142C60
• 8966142F80
• 275300-2890
• 89661-42C60
• 89661-42F80

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, key, key reader and immobiliser to testing / repairs.

Common Faults:

• No start
• No spark
• No injector pulse
• Immobiliser faults

OEM Reference Numbers:

• 2110005960
• 8966142340

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, key, key reader and immobiliser to testing / repairs.

Common Faults:

• No start
• No spark
• No injector pulse
• Immobiliser faults

OEM Reference Numbers:

• 2110005960
• 8966142340

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, key & key reader for testing / repairs.

Common Faults:

• Transmission direct clutch failure
• ECM does not fully release the direct clutch solenoid
• No start
• Fault code P0607 - Control module performance
• Fault code P0335 - Crank signal missing 
• Fault code P0339 - Crank circuit intermittant
• Fault code P0341 - Camshaft signal out of range
• Fault code P0750 - Transmission shift solenoid A malfunction
• Fault code P0753 - Transmission shift solenoid A electrical
• Fault code P0755 - Transmission shift solenoid B malfunction
• Fault code P0758 - Transmission shift solenoid B electrical
• Fault code P1760 - Shift solenoid SLT malfunction stored

OEM Reference Numbers:

• 8966142700
• 8966142701
• 8966142702

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, key & key reader for testing / repairs.

Common Faults:

• Transmission direct clutch failure
• ECM does not fully release the direct clutch solenoid
• No start
• Fault code P0607 - Control module performance
• Fault code P0335 - Crank signal missing 
• Fault code P0339 - Crank circuit intermittant
• Fault code P0341 - Camshaft signal out of range
• Fault code P0750 - Transmission shift solenoid A malfunction
• Fault code P0753 - Transmission shift solenoid A electrical
• Fault code P0755 - Transmission shift solenoid B malfunction
• Fault code P0758 - Transmission shift solenoid B electrical
• Fault code P1760 - Shift solenoid SLT malfunction stored

OEM Reference Numbers:

• 8966142700
• 8966142701
• 8966142702

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit
• The customer must send the ECM, key, key reader and immobiliser for testing/repairs

Common Faults:

• No start
• No signal to fuel pump
• Injector driver fault
• Immobiliser faults
• No check engine light
• Fault code 99 - Immobiliser signal lost

OEM Reference Numbers:

• 89666-60050
• 8966660050
• 2750000036
• 89666-60060
• 8966660060
• 89661-60830
• 8966160830
• 175200-1440

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must supply the ECM, key, key reader and immobiliser for testing / repairs

Common Faults:

• Fault code P0606 - ECM processor fault
• No start
• Injector driver fault

OEM Reference Numbers:

• 8966160F20
• 8966160F21
• 896616A320
• 275000-5911
• 2750005911

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must supply the ECM, key, key reader and immobiliser for testing / repairs

Common Faults:

• Fault code P0606 - ECM processor fault
• No start
• Injector driver fault

OEM Reference Numbers:

• 8966160F20
• 8966160F21
• 896616A320
• 275000-5911
• 2750005911

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• PEC will supply 2 new ignition coils with this repair and must be fitted upon installation of PMS unit. 

Common Faults:

• Running rough
• Running on 2 cylinders
• Fault code 052 (039) - Cylinders 1/4 misfire
• Fault code 055 (042) - Cylinders 2/3 misfire
• Fault code 006 (009) - Manifold pressure sensor implausible
• Fault code 007 (010) - PMS No intake manifold pressure
• Fault code 119 (063) - PMS control unit voltage too low

OEM Reference Numbers:

• 0185451132
• 0261200614
• 0155457132
• 0261200610
• 0155450132
• 0261200612
• 0125455332
• 0261200603

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• PEC will supply 2 new ignition coils with this repair and must be fitted upon installation of PMS unit. 

Common Faults:

• Running rough
• Running on 2 cylinders
• Fault code 052 (039) - Cylinders 1/4 misfire
• Fault code 055 (042) - Cylinders 2/3 misfire
• Fault code 006 (009) - Manifold pressure sensor implausible
• Fault code 007 (010) - PMS No intake manifold pressure
• Fault code 119 (063) - PMS control unit voltage too low

OEM Reference Numbers:

• 0185451132
• 0261200614
• 0155457132
• 0261200610
• 0155450132
• 0261200612
• 0125455332
• 0261200603

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• The customer must send the ECM, key, key reader and immobiliser for testing / repairs

Common Faults:

• Throttle related issues
• Running rough
• Fault code 15 - Throttle control circuit malfunction
• Fault code 99 - Immobiliser signal lost

OEM Reference Numbers:

• 8966660021
• 1758003120
• 8966660010
• 8966160520
• 8966660860

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• PEC will supply 2 new ignition coils with this repair and must be fitted upon installation of PMS unit. 

Common Faults:

• Running rough
• Running on 2 cylinders
• Fault code 052 (039) - Cylinders 1/4 misfire
• Fault code 055 (042) - Cylinders 2/3 misfire
• Fault code 006 (009) - Manifold pressure sensor implausible
• Fault code 007 (010) - PMS No intake manifold pressure
• Fault code 119 (063) - PMS control unit voltage too low

OEM Reference Numbers:

• 0185451132
• 0261200614
• 0155457132
• 0261200610
• 0155450132
• 0261200612
• 0125455332
• 0261200603

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• PEC will supply 2 new ignition coils with this repair and must be fitted upon installation of PMS unit. 

Common Faults:

• Running rough
• Running on 2 cylinders
• Fault code 052 (039) - Cylinders 1/4 misfire
• Fault code 055 (042) - Cylinders 2/3 misfire
• Fault code 006 (009) - Manifold pressure sensor implausible
• Fault code 007 (010) - PMS No intake manifold pressure
• Fault code 119 (063) - PMS control unit voltage too low

OEM Reference Numbers:

• 0185451132
• 0261200614
• 0155457132
• 0261200610
• 0155450132
• 0261200612
• 0125455332
• 0261200603

PLEASE NOTE: This is supplied as a repair service. You must send us your existing unit for repair. We will cover postage for sending the repaired unit back to you. ALL INSTRUCTIONS WILL BE PROVIDED ON CHECKOUT.

• This is a fast and prompt repair service provided by specialist electronics engineers and testers.

• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• There will be a $295 test fee in case the unit is deemed not repairable
• This service comes with a 12-month manufacturer's warranty for your peace of mind
• All repair jobs will require no programming - a direct plug-and-play

Impotant Information: 

• This is a test and repair service of the customers own unit.
• PEC will supply 2 new ignition coils with this repair and must be fitted upon installation of PMS unit. 

Common Faults:

• Running rough
• Running on 2 cylinders
• Fault code 052 (039) - Cylinders 1/4 misfire
• Fault code 055 (042) - Cylinders 2/3 misfire
• Fault code 006 (009) - Manifold pressure sensor implausible
• Fault code 007 (010) - PMS No intake manifold pressure
• Fault code 119 (063) - PMS control unit voltage too low

OEM Reference Numbers:

• 0185451132
• 0261200614
• 0155457132
• 0261200610
• 0155450132
• 0261200612
• 0125455332
• 0261200603