PLEASE NOTE: This part is re-manufactured and is supplied as an exchange service. You must send us your existing unit first and we will provide you a re-manufactured unit in exchange.

We will cover postage for sending the re-manufactured unit back to you.

• Re-manufactured part is a direct fit replacement for the vehicles listed below
• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• This service is provided by specialist electronics engineers.
• Re-manufactured unit comes with a 12-month manufacturer's warranty for your peace of mind
• Will require no programming - a direct plug-and-play.

Please contact us prior to purchase if you have any questions or to confirm part suitability.

Impotant Information: 

• This BCM comes complete with two programmed key fobs.
• IMPORTANT NOTE:
• Upon fitment of replacement BCM, please ensure correct Low Speed Engine Fan Relay has been fitted to vehicle. These are prone to having an incorrect relay fitted and therefore damaging the BCM.
• Use only a Genuine Holden Low Speed Engine Fan Relay

Common Faults:

• Remote operation.
• Central locking.
• Power windows.
• No start.
• Stuck in alarmed mode.

OEM Reference Numbers:

• 92147231
• 92100737

PLEASE NOTE: This part is re-manufactured and is supplied as an exchange service. You must send us your existing unit first and we will provide you a re-manufactured unit in exchange.

We will cover postage for sending the re-manufactured unit back to you.

• Re-manufactured part is a direct fit replacement for the vehicles listed below
• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• This service is provided by specialist electronics engineers.
• Re-manufactured unit comes with a 12-month manufacturer's warranty for your peace of mind
• Will require no programming - a direct plug-and-play.

Please contact us prior to purchase if you have any questions or to confirm part suitability.

Impotant Information: 

• This BCM comes complete with two programmed key fobs.
• IMPORTANT NOTE:
• Upon fitment of replacement BCM, please ensure correct Low Speed Engine Fan Relay has been fitted to vehicle. These are prone to having an incorrect relay fitted and therefore damaging the BCM.
• Use only a Genuine Holden Low Speed Engine Fan Relay

Common Faults:

• Remote operation.
• Central locking.
• Power windows.
• No start.
• Stuck in alarmed mode.

OEM Reference Numbers:

• 92147231
• 92100737

PLEASE NOTE: This part is re-manufactured and is supplied as an exchange service. You must send us your existing unit first and we will provide you a re-manufactured unit in exchange.

We will cover postage for sending the re-manufactured unit back to you.

• Re-manufactured part is a direct fit replacement for the vehicles listed below
• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• This service is provided by specialist electronics engineers.
• Re-manufactured unit comes with a 12-month manufacturer's warranty for your peace of mind

Please contact us prior to purchase if you have any questions or to confirm part suitability.

Impotant Information: 

• Unit needs programming.
• This unit is repaired using the unique ultrasonic wire bonding machine. View the video below of the bonding machine in action.

Exchange Info:

• Unit requires matching by customer with G-Scan or Tech2.
• Customer must obtain the ECM 4 digit security code from the vehicle or from a GM dealership by providing the 17 digit vin number. This 4 digit code needs to be written on the shipping tag provided and returned with the exchange ECM to avoid a core penalty.
• When ordering this part the customer must supply the 17 digit vin number from the vehicle and transmission type (Auto / Manual) so PEC can supply the unit with the correct programming.
• If you would like further information regarding programming of ECM's have a read of our blog

Common Faults:

• Missing on one cylinder.
• No Start.
• Wont crank, bridge starter relay and engine cranks.

OEM Reference Numbers:

• 0261209184
• 12585814
• 12590358
• 12592002
• 12593783
• 12595974
• 12600940
• 92175385
• 92175386
• 92179450
• 92190063
• 92193809
• 0261209022
• 0261209024
• 0261209025
• 0261209031
• 0261209060
• 0261209062
• 0261209063

PLEASE NOTE: This part is re-manufactured and is supplied as an exchange service. You must send us your existing unit first and we will provide you a re-manufactured unit in exchange.

We will cover postage for sending the re-manufactured unit back to you.

• Re-manufactured part is a direct fit replacement for the vehicles listed below
• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• This service is provided by specialist electronics engineers.
• Re-manufactured unit comes with a 12-month manufacturer's warranty for your peace of mind
• Will require no programming - a direct plug-and-play.

Please contact us prior to purchase if you have any questions or to confirm part suitability.

Impotant Information: 

• Transmission Electro-Hydraulic Control Module (TEHCM) - suits Holden VE 6L45 Auto      
  between 01/2012-12/2013.
• Injectronics require VIN and OE number to supply correct     
  programmed exchange unit.
• Image below shows location of OE number on your original TEHCM

Common Faults:

• Harsh gear changes
• Flaring during gear changes
• Logging P0842 - Trans fluid pressure sensor A circuit LOW
• Logging P0843 - Trans fluid pressure sensor A circuit HIGH

OEM Reference Numbers:

• 24257213
• 24259639
• 24259835
• 24275873
• 24261870
• 6L45 TEHCM

PLEASE NOTE: This part is re-manufactured and is supplied as an exchange service. You must send us your existing unit first and we will provide you a re-manufactured unit in exchange.

We will cover postage for sending the re-manufactured unit back to you.

• Re-manufactured part is a direct fit replacement for the vehicles listed below
• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• This service is provided by specialist electronics engineers.
• Re-manufactured unit comes with a 12-month manufacturer's warranty for your peace of mind
• Will require no programming - a direct plug-and-play.

Please contact us prior to purchase if you have any questions or to confirm part suitability.

Impotant Information: 

• Transmission Electro-Hydraulic Control Module (TEHCM) - suits Holden VE 6L45 Auto      
  between 01/2012-12/2013.
• Injectronics require VIN and OE number to supply correct     
  programmed exchange unit.
• Image below shows location of OE number on your original TEHCM

Common Faults:

• Harsh gear changes
• Flaring during gear changes
• Logging P0842 - Trans fluid pressure sensor A circuit LOW
• Logging P0843 - Trans fluid pressure sensor A circuit HIGH

OEM Reference Numbers:

• 24257213
• 24259639
• 24259835
• 24275873
• 24261870
• 6L45 TEHCM

PLEASE NOTE: This part is re-manufactured and is supplied as an exchange service. You must send us your existing unit first and we will provide you a re-manufactured unit in exchange.

We will cover postage for sending the re-manufactured unit back to you.

• Re-manufactured part is a direct fit replacement for the vehicles listed below
• In some cases, we may require extra components or additional programming/testing to perform the job. This may incur an additional fee. If this applies to you, we will advise you first.
• This service is provided by specialist electronics engineers.
• Re-manufactured unit comes with a 12-month manufacturer's warranty for your peace of mind
• Will require no programming - a direct plug-and-play.

Please contact us prior to purchase if you have any questions or to confirm part suitability.

Impotant Information: 

• Transmission Electro-Hydraulic Control Module - suits Holden VE 6L50 Auto (01/2010-12/2011)
• Injectronics require VIN and OE number to supply correct     
  programmed exchange unit.
• Image below shows location of OE number on your original TEHCM

Common Faults:

• Harsh gear changes
• Flaring during gear changes
• Logging P0842 - Trans fluid pressure sensor A circuit LOW
• Logging P0843 - Trans fluid pressure sensor A circuit HIGH

OEM Reference Numbers:

• 24258304
• 24251412
• 24251029
• 24254908
• 24256124
• 24275874
• 6L50 TEHCM